christo829
Hobbyist From Fairfax, Virginia
Latest Activity Postings About
-
-
christo829 replied to the thread NEED HELP 05 Trailblazer Fuel Gauge Problem. Bad PCM?.That's pretty classic for a stepper motor failure. When some of mine failed, they'd twitch up a little bit when they were supposed to do the sweep, then just fall back, usually below the zero... -
christo829 reacted to mrrsm's post in the thread Starter motor - I take it this wire should be attached? with
Like.
AHHhh.... The GOOD Ol' Days... :2thumbsup: -
christo829 reacted to movietvet's post in the thread Starter motor - I take it this wire should be attached? with
Haha.
@mrrsm class was in session. @Mooseman, did you raise your hand before speaking? :biggrin: -
christo829 reacted to Mooseman's post in the thread Starter motor - I take it this wire should be attached? with Haha.
So, short answer, YES! :biggrin:
-
christo829 reacted to 02FailBlazer's post in the thread Starter motor - I take it this wire should be attached? with Like.
Threw an insulated terminal on there and crimped the crap out of it. It's at least three times as thick as what GM put on there, no way this thing ever breaks. Fingers crossed that the connection...
-
christo829 reacted to krunal88's post in the thread SOLVED! Washer and wipers turn on when truck started with Like.
So to finalize, I ended up getting a new old stock Valeo wiper motor from good ole eBay. Part number 15094704. I ended up just swapping on the pulse board from the new motor onto the existing...
-
I did my oil change yesterday, and while waiting for every last drop to drip out (I could never open an oil change shop, I'd drive myself right out of business), I was rolling around under the...
-
Well, with respect to the ignition switch, the verdict is in--I hope. The photo below shows the switch I just removed on the left, the Dorman version, and on the right is the one I had removed a...
-
It's a good point but I feel optimistic it won't be a problem. She is able to close the rear hatch, not without some effort but it's easier for her to put whatever weight she has into pulling it...
-
I would be checking the motor and transmission mounts.
-
This is likely a circuit protection Schottky diode based on the lead count, markings & package size. A Google search on "43s" three pin smd component "44" gives the following (AI) summary: Based...
-
jozeppyman, here is the component you are wondering about. I tried researching it, but research goes in all directions as far as the alleged part number. This is from an authentic Tech2 VCI...
-
christo829 reacted to Mooseman's post in the thread Craigslist, Marketplace, Kijiji morons with
Wow.
W...T...F... -
Yea, I work on vehicles in my driveway. I have a regular customer that has a guard at front and any time I do anything on his Silverado truck, that requires any movement over or around that brush...
-
I've never seen a Daewoo with a brush guard before :laugh: For the "classic" TB, it's probably as rare as the rear spoiler and the roof rack clearance lights. I do believe there were some...
-
Interesting--I did learn about the port block-off when I was looking into the AIR delete for the PCM. In fact i ordered a gasket for it from Amazon and was planning on making a plate myself but...
-
christo829 replied to the thread The mythical GM brush guard.Put some whiskers on it and it looks like a catfish getting ready to suck in some prey... ;)
-
Just watched this video. Very informative.
-
christo829 reacted to azswiss's post in the thread Video: This is why you don't work under with a jack! with Like.
A+ for effort though . . .
-
christo829 reacted to Mooseman's post in the thread Video: This is why you don't work under with a jack! with Like.
That was mentioned a lot in the comments. Heck even the cop had trouble getting one. Only thing I can think of is that the store had none assembled. Things I noted: - The guy was pinned under...
-
christo829 reacted to USCGCWO's post in the thread Video: This is why you don't work under with a jack! with Like.
I don't understand why the cop was the one who called for a jack. The store manager and customers should have had the car up on a jack and stands well before the cops arrived. Need some of that...
-
Here is a possibility...
-
ACDelco Thermostat-S/S Pipe Combo vs. the STANT Flavor = Apples to Oranges: Via my "Flickr-Bucket" New Trailblazer Engine Parts Album: Packaging, Part Numbers, Box Ends, Button and Spring...
-
OK, calm down there Bobby. This was meant as sarcasm, which I do believe was the intended purpose of the original image that I picked up from "that" blue book place of faces. Unless.... :rotfl:
-
christo829 reacted to movietvet's post in the thread Video: This is why you don't work under with a jack! with Like.
Yea, this is why I use ramps and blocks and jack stands and floor jacks. I will NOT let my girl see this video. Even with all the safety steps I take and having been doing this for close to 50...
-
-
Loading…
-
Loading…