christo829
Hobbyist From Fairfax, Virginia
Latest Activity Postings About
-
-
Silverware. https://www.facebook.com/commerce/listing/1004893802460775/?media_id=0&ref=share_attachment -
Sadly I had to let my 2006 Trailblazer go. I was wanting to rebuild it but haven't had the time or money to do an engine and transmission rebuild. https://www.facebook.com/reel/4230512607278798
-
Those that can, do. Those that can't, talk. Those that can't talk become influencers.
-
christo829 reacted to TJBaker57's post in the thread Engine Dies at 40mph 1500rpm and 140 degrees... with
Like.
FWIW, I suspect something electrical. Perhaps something like a PCM ground or similar critical circuit without which the engine cannot run. I had an 86 TransAm, bought new, It sometimes would... -
Probably not unless you start running a turbo or making tons of extra power. Watched a video from Atlas Industries and even they said that if it's properly maintained and not modified, the stock...
-
christo829 replied to the thread NEED HELP 05 Trailblazer Fuel Gauge Problem. Bad PCM?.That's pretty classic for a stepper motor failure. When some of mine failed, they'd twitch up a little bit when they were supposed to do the sweep, then just fall back, usually below the zero...
-
christo829 reacted to mrrsm's post in the thread Starter motor - I take it this wire should be attached? with Like.
AHHhh.... The GOOD Ol' Days... :2thumbsup:
-
christo829 reacted to movietvet's post in the thread Starter motor - I take it this wire should be attached? with
Haha.
@mrrsm class was in session. @Mooseman, did you raise your hand before speaking? :biggrin: -
christo829 reacted to Mooseman's post in the thread Starter motor - I take it this wire should be attached? with Haha.
So, short answer, YES! :biggrin:
-
christo829 reacted to 02FailBlazer's post in the thread Starter motor - I take it this wire should be attached? with Like.
Threw an insulated terminal on there and crimped the crap out of it. It's at least three times as thick as what GM put on there, no way this thing ever breaks. Fingers crossed that the connection...
-
christo829 reacted to krunal88's post in the thread SOLVED! Washer and wipers turn on when truck started with Like.
So to finalize, I ended up getting a new old stock Valeo wiper motor from good ole eBay. Part number 15094704. I ended up just swapping on the pulse board from the new motor onto the existing...
-
I did my oil change yesterday, and while waiting for every last drop to drip out (I could never open an oil change shop, I'd drive myself right out of business), I was rolling around under the...
-
Well, with respect to the ignition switch, the verdict is in--I hope. The photo below shows the switch I just removed on the left, the Dorman version, and on the right is the one I had removed a...
-
It's a good point but I feel optimistic it won't be a problem. She is able to close the rear hatch, not without some effort but it's easier for her to put whatever weight she has into pulling it...
-
I would be checking the motor and transmission mounts.
-
This is likely a circuit protection Schottky diode based on the lead count, markings & package size. A Google search on "43s" three pin smd component "44" gives the following (AI) summary: Based...
-
jozeppyman, here is the component you are wondering about. I tried researching it, but research goes in all directions as far as the alleged part number. This is from an authentic Tech2 VCI...
-
christo829 reacted to Mooseman's post in the thread Craigslist, Marketplace, Kijiji morons with
Wow.
W...T...F...
-
-
Loading…
-
Loading…
