Front diff asjuster bearing

[Gerbil21]

Looking for info on replacing the front driver side axle bearing, the located in the adjuster.

I've seen a few threads about replacing the whole adjuster however I'm looking to just replace the bearing while the adjuster is still in the diff.

There's videos on people doing this on Silverados and tables but haven't found anything on our platform, hoping it'll be the same steps

05:00 min mark

This is the only 360 video but adjuster was removed and bearing was pressed

 

[Mooseman]

Did find this in our FAQ:

Rebuilding the Front Diff - Tips and Tricks

 

[Gerbil21]

Did find this in our FAQ:

Rebuilding the Front Diff - Tips and Tricks

Yeah I've seen that but it didn't go into replacing the axle bearings, I just want to make sure leaving the adjuster in if it's not loose wouldn't cause an issue with its threads in the case when pushing and pulling a bearing from it