Recent content by Enderbygrandpa

  1. E

    Has anyone seen this happen before?

    what air pressure did you have in the tire? Are the tires P series or LT If they were LT you can not fill them to the pressure on the sidewall. Our wheels are only rated for P series tire pressures.
  2. E

    4WD Gremlins. Help a newbie out!

    you should read manual on how to use your 4wd you are not supposed to switch into 4hi while in gear or above 3mph.
  3. E

    Airbag light with steering wheel movement

    I know of a guy that ignored the light for the air bag and it went off one day he ended up in the ditch! if it was me I would pull the fuse until you can get it fixed.
  4. E

    Cooling Fan Clutch Decision

    mine did that right at first next day it settled down and I can spin it no problem when cold
  5. E

    Front mode actuator problem

    his description of the position of the actuators matches my 2003 TB manual system. The middle actuator is floor dash but the right hand one above I am pretty sure is the defrost. is that picture that you post maybe for automatic system? :confused: maybe the picture is upside down compared to...
  6. E

    Idles at 900

    just a question ? does this happen just after you fill the gas tank? that's what happens to mine and lasts for about 50-60 miles then goes back to normal 650 RPM and I have never been able to track down the cause. never throws a code. I just live with it. If anybody comes up with a fix then I...
  7. E

    Bizarre Cam sensor behavior

    I was having idle problem would almost stall. turns out had low Freon in air conditioner added can of Freon problem went away as I was filling.:smile:
  8. E

    Spark plug torque

    when you torque something with a torque wrench it does not change the torque either lubed or not BUT what it changes is the clamping force that the nut, bolt etc.exerts on the unit this why you should not lubricate the threads if they say Dry torque, you could strip the threads. The engineers...
  9. E

    intermittant high idle still

    So maybe Roadies truck needs fixing!:rotfl:
  10. E

    intermittant high idle still

    OK installed new FPR and engine does not change the rpm's when I unhook the vacuum line. Truck idles at 650 on the tach, runs smooth. Roadie I still cannot understand how when you unhook your vaccuum line it increases the RPM's. On my truck there is no measurable vaccuum there at idle:confused:
  11. E

    Cat

    I don't think you can get the oe cat out without dropping the tranny support bracket.
  12. E

    humming and vibrating in front driver side wheel

    I would change the swaybar bushings while your at it.
  13. E

    intermittant high idle still

    ok thanks just curious but is your tailpipe black as if it is running rich? my pipe is always black yet I see others that the pipe is gray or almost white on the inside. If i could clean this up maybe I could get better mileage. run between 16 to 18 highway at about 65mph for at least the last...
  14. E

    intermittant high idle still

    OK went out and hooked up a vaccuum gauge to the port on the intake resonator and stated the engine. nothing the gauge did not move revved the engine same thing checked the gauge it works. the part number on the resonator is 15176239 and 15047009 I don't see how this would work as the port...
  15. E

    intermittant high idle still

    so does your engine revs increase when you remove the hose and if so can you hear or feel any vaccuum. can u measure any vaccuum with a gauge? I'm going to see what mine shows tommorrow then get me a new FPR

Forum Statistics

Threads
24,297
Posts
648,989
Members
20,818
Latest member
hadi

Members Online

No members online now.