Recent content by bastenblood

  1. B

    Replace compressor clutch or whole compressor?

    My A/C clutch engages for a few seconds every minute , wich makes the rpm drop to 550 everytime , on or off . Did I need to check the the compressor and clutch or there is other issues like a leak or a sensor to check ? A/C is not so cold too.
  2. B

    No Oil Pressure ...

    So I have the shop check the oil pressure when the gauge indicates 0 , and it was good . Installed the new sensor , everything is back to normal .
  3. B

    No Oil Pressure ...

    The oil and filter are new from thursday , I do not know wich brand of filter the shop I go to put in usually , the oil level is good , no leak and no rpm drop when the pressure goes to 0
  4. B

    No Oil Pressure ...

    Anyone else have any insight ?
  5. B

    No Oil Pressure ...

    Just made this , just a little bit cooler than an hour ago when i made the first video . No oil pressure drop , just is usual tick . http://youtu.be/LdHrYspnAXA
  6. B

    No Oil Pressure ...

    Yup , I clean the throttle and change the air filter every year . The engine was ticking before this problem and when the pressure drop there is no sound or vibration change in any way . My cluster makes a grinding noise too ( did anyone hear it? ) Where is the sensor located ?
  7. B

    No Oil Pressure ...

    When the truck is warmed up , at a stop or slowing down near a stop , the oil pressure gauge drop to 0 , with the check gage light . If it stays at idle , it will indicate 0 until I stop the truck wondering what the hell is going on .. http://youtu.be/71IgGw7OT3w I have a 2002 Envoy SLE 4,2...
  8. B

    intermittent stalling

    The rpm on mine always drops every minute and because the ac compressor clutch engage , even if it's set to off . Can I just change the clutch or what ?
  9. B

    Downshifting

    Very often , I pass from D , to 3rd gear , to 2nd just to slow down without using the brakes , and then return to D . Is this a bad habit to have ?
  10. B

    How To: Clean The Camshaft Position Actuator Solenoid (CPAS) Picture Heavy

    Last winter I had to replace the O² sensor on the manifold because the truck smelled gas and runs bad , so instead of cleaning it I bought a new CPAS , a Delco one . I'm planning to replace it on my own , so do I need to do anything special except from disconnecting the battery for 30+...
  11. B

    Post A Pic Of Your GMT RIGHT NOW!!!

    Clean it for the weekend , and try to keep it that way on the work site during the week .
  12. B

    Custom Laser-Cut Stainless Parts?

    All of those . Totally approved :thumbsup:
  13. B

    What's that noise ..

    Six AC Delco plugs and new fuel filter installed and even add some Kleen-Valve in the oil , maybe it need some time to work but the motor still sound like a diesel .. http://youtu.be/7XrWN-JsCpo

Forum Statistics

Threads
24,321
Posts
649,293
Members
20,865
Latest member
vargas53

Members Online

No members online now.