Recent content by Wooluf1952

Is that what that red wire is for? :crackup:

I buy extra 5 qt. bottles to make up the 6 qts. my Canyon needs. It's a lot cheaper than buying extra single quart bottles.

I cut a piece of rain gutter and use it like a sluice. The length depends on whether you use ramps or have a lifted truck. One end in the drain pan and the top up under the filter. I do the filter first. I've also used a cut-off 2 liter soda bottle.

The oil drain plug was stuck. So they tried to tilt the truck and drain thru the oil fill hole. :raspberry:

When I first read the title I thought you wanted to us the LED bar for backing up. Depending on your local laws, I don't see how this would be any different than fog lights. As long as it is aimed correctly. :twocents: You could also try polishing the headlight lenses.

Thanks MRRSM While I was looking at that CD, I found a hard copy: I can get a lot of the info from You Tube, but I like a hard copy also.

Helm inc. http://www.helminc.com/helm/homepage.asp?Style=helm I thought about getting the manuals for my 2017 GMC Canyon, buy $350 for the USB drive and $475 for the paper manuals. Not worth it for me.

Off topic, but I cut a short piece of gutter (18"- 24" ?) one end in the drain pan the other up past the filter. Works with or without the hatch.

I bought a repair kit from the dealer (about $35) when mine went bad. 2 screws, cover plate, rubber gasket and (the main part) a small spring. The original spring had rusted and allowed the air to escape. I'll see if I have the part #. Part/number 15183676 ECAS Compressor Repair Kit $35 in 2016.

A tire patch kit and a metal hose clamp might do it. I don't know what the refrigerant pressure is but that worked on a garden hose with 60-80 psi of water pressure.

'08 doesn't have a FPR. If you're addressing psa55

One thing I've noticed with 409 SS: While a magnet will stick to it , it is much easier to pull the magnet off of 409 SS than it is to pull that same magnet off of plain or aluminized steel. :twocents:

Just an FYI. Be wary of washer fluid that contains things that have additives like Rain-X. They can coagulate and clog the hoses. I had to siphon everything out of mine and rinse it out.

Agreed. The bigger the wheel, the more power it takes to turn them.

Could the shuddering be caused by bad motor mounts?