Recent content by Wawuce

So if I went the valve body route; what’s the going price to get for the kit?

And the only way to tell is by pulling the transmission. Correct? It’s a toss up on what to do. The truck has 200k on it. Motor has a tick(been there when I bought it in 2014). Put new front end parts(ball joints, tie rods, rear shocks, sway bar end links). If I pull the valve body; what am I...

So if manual shifting is fine what do you think it could be. I am grateful for any input. It helps me out more than you know.

The codes were air temp sensor and vvt sensor. Needs an oil change. I haven’t tried the manual shift yet. I put the truck up on blocks today. Going to try and look at it tomorrow after I get out. So much for the new fluid. Not sure if I messed something up when I put the pan back on. Just...

So I just came back from another trip. The transmission drops out of gear and then back in. Here is a video of it. https://drive.google.com/file/d/1ADq_NMQnocJVL4T-6TW97GT36FcX9Biz/view?usp=drivesdk

Here is the video https://drive.google.com/file/d/1ADq_NMQnocJVL4T-6TW97GT36FcX9Biz/view?usp=drivesdk

Just got back from another drive. Still acts up. I checked the fluid level and it sits just under the hot line on the stick. That gives me a total of 7 quarts. This is really driving me crazy. I recorded a video of the shifting but can’t figure out how to upload it.

Well I finally got to do this job. Went pretty well I think. Something doesn’t seem right though. I replaced both solenoids and filter. Put everything back together. Put 5 quarts of transmission fluid in. Went for a ride. It shifted a lot better. After driving it for a few days I noticed a...

Thank you for that thorough description. By any chance do you know the part #'s? I have the 4.2 engine with awd/4wd. Just want to make sure i get the right ones. I plan on doing this when the weather is warmer. Right now its still in the 30's here. Also is there a transmission identifier that...

Which solenoids did you change? I have an 04 tb with the same issue. Has 200,000 on it and does the same thing yours did. I plan on changing filter and fluid also. May as well try the solenoids.

Are there any that can do a case learn that won’t break the bank?

Any idea how much a case relearn costs?

I replaced the camshaft sensor and the crank sensor. Didn’t seem to really make a difference. I was checking the coils to see if one was bad by taking one off a time and see if it made a difference. I got a cylinder 1 misfire. So then I swapped coils from 1 & 3. With it running I unplugged coil...

Thank you for the info. On my way home it finally threw p0301. That means it’s the number 1 cylinder. I’m going to swap coils 1 & 2. Then I’ll swap plugs from those cylinders. Coil 1 with plug 2 and coil 2 with plug 1. If cylinder 2 is good that means I definitely have an issue with cylinder 1...

What scanner did you buy?