Recent content by dennysemn

Reporting back: Purchased a 2 ohm resistor off e-bay for less than $3(free shipping), came within days. Bought some mini 3/16 female connectors at Radio Shack for $2.50 and soldered them on. I then pulled the red power cable from battery and inserted the device. Finally, I wrapped the end with...

Ooops. Meant to verify if it was a 2 ohm resistor. Sorry for the confusion.

I will. Just to verify, that was 1 ohm resistor, correct? I looked at 1 ohm/1 watt resistors today at Radio Shack and they seem rather large for what I'm used to (20 ohm and higher) working with. They didn't carry 2 ohm resistors.

Thanks Harpo. I'll try that and report back.

Recently I had the opportunity to replace the driver's seat with a used one in better shape. It was easy to install. However, the seat I was able to find did not have a side curtain air bag on the side as did the original. I ended up with a two prong supply connector that did not plug into...

Thanks, I'll try it then. The navigation Jensen uses isn't anything to write home about anyway, was it?

A Best Buy car audio technician is trying to tell me the only way for my head unit to work with this year and model is to bypass the factory amplifier. Does anyone know if the GMOS-014 will work with Bose in my vehicle? Or do you know if the audio wiring changed after 2002? I'm wondering if...

bravader, do you have the Bose amplifier system in your Bravada?

Thanks, STLtrailbSS! Mybad, I didn't mention I have a Bravada. The first illustration looks like what I have.

The task is to replace the OEM 6CD Bose Radio with an in dash nav/entertainment unit. So far, I've been able to remove the top and sides of the accessory panel, but am having trouble getting the bottom free. Could someone please tell me what needs to be done:undecided:, or point me in the right...

I have the Manik brush guard brackets. I have all the used hardware (nuts and bolts), except one of the upper brackets. One of the lower brackets is bent, but could be straightened. Manik has recently gone out of business, as you may know. Let me know if you're interested, and we can work...